ShenZhen JWY Electronic Co.,Ltd
ShenZhen CNJWY Electronics Co.,Ltd.
Add to Cart
TF Connector Mount Roll Material-Metal Phosphorus Bronze H1.8
Introduction to Product Use:
The working principle of the SD card holder is that there is a corresponding raised opening in the card slot, its SD holder is inserted into the card slot of the card holder, and then the SD card holder is transmitted in the form of a command to control the reading and writing of the SD card. It is also possible to read and write multiple SD cards or single SD cards according to the command.
SD Card Properties:
| Type | TF SD card connection flip type |
| Product height | 1.8 mm |
| Rated current | 0.5 A AC(RMS) |
| Rated voltage | 100V AC(RMS) / DC |
| Contact resistance | 100 mΩ Max |
| Insulation resistance | 1000 MΩ Min |
| Voltage resistance | 500V AC r.m.s |
| Operating temperature range | -20º C ~ +80º C |
| Materials-Resin High | Temperation UL94V-0 |
Our Service:
1. Lead customer choose a best connection sulotion way.
2. 20pcs free sample. Support more than 20pcs sample for old customer.
3. OEM/ODM service. We have a strong R&D team to support connector design.
4. Quickly response, email reply within 12hours,online inquiry is welcome.
5: Serivce attitude:our business is not just connector supply, it's about deliverying promises.
Our Advantages:
1. High-Quality Guarantee
CNJWY has been focusing on improving the Quality Control Systems, aiming at providing high-quality products that fit ISO9001 Certificate for years.
2.Competitive Price
We have a whole set production process which include electroplating,stamping,injection molding,assemly to ensure our competetive price.
3. Customized Packaging
All the products are available for customized packaging according to your demand.
4. Fast Delivery
Most efficient producing makes fast delivery, which would make sure of the lead time always ahead of your expectation.
5.The series of product specifications are complete, but also tailor-made. Safe and reliable quality, competitive price.
Environment for the use of SD card seat:
1. when the SD card is used in the dusty environment, the dust will enter the interior from the interface of the SD card seat. If there is too much accumulation, it will cause the contact fault and the bad action in the use of the SD card seat. Therefore, we should regularly remove dust or debris inside the SD card holder.
2. when the SD card work process, do not arbitrarily insert the SD card out, no one will cause the SD card data loss on the one hand, and on the other hand, it may also cause the SD card damage.
3. in the connection of the SD card and the SD card, we should pay attention to whether the inductive metal chip of the SD card is fully connected to the SD card. If the chip is in contact with or is not touched, it will lead to the failure of the SD card to read the data of the SD card.
Where it needs to be used:
The SD deck models provided include: S deck TF full plastic, divided into different packaging methods, patch SD mount and plug-in SD mount; There are also self-loading SD seats, lock SD seats, micro SD seats, and so on.
